Danish trolley with mesh wired steel base
Danish trolleys with a steel bottom especially made for sectors that set high standards to the quality of their trolleys. These trollies can be used in the food and catering industry, by order-pickers and in nurseries for heavy applications.
| Qty | Unit price | Total | Discount | |
|---|---|---|---|---|
| 1 | €119.00 | €119.00 | 0 | |
| 60 | €113.05 | €6,783.00 | 5 | |
| 120 | €111.86 | €13,423.20 | 6 | |
| 240 | €110.62 | €26,548.80 | 7 |
Danish trolley with mesh wired steel base
If your Danish trolleys or CC containers have to meet high quality or hygiene requirements, we have special Danish trolleys with steel wire bottom instead of wood.
This can be a solution for sectors such as catering, nurseries and supermarkets. It is also a solution for logistics companies that have to deal with heavier loads on the Danish trolley. Also, germs cannot develop in wooden parts and it is easy to keep clean and disinfect. As a result, these danish trolleys can also be used in the food and grocery industry.
The chassis is hot-dip galvanised with a zinc protective layer. This layer is also resistant to chlorine.
The trolleys are supplied as standard with:
- 1 x undercarriage
- 4 x galvanised posts, 180 cm, 30 holes
- 2 x swivel wheels, PP with rubber tread
- 2 x fixed wheels, PP with rubber tread
We also have steel wire plates in our range. We recommend heavy duty posts for this trolley.
| Country of origin | : | EU |
| Material | : | Hot-dip galvanised steel |
| External dimensions | : | 1350 * 565 * 1900 mm |
| Internal dimensions | : | 1270 * 545 * 1735 mm |
| Weight ( excl. posts ) | : | 17 kg |
Dimensions
What are the dimensions of a Danish trolley?
Horti-Innovations has different types of trolleys. Below are the dimensions of all trolleys in our range.
The standard Danish trolley or Danish container:
Outer dimensions Danish trolley (Danish container): (L x W x H)
1350 x 565 x 1900 mm
Inside dimensions Danish trolley: (L x W x H)
1270 x 545 x 1735 mm
This trolley is also available with steel wire base, however, the dimensions are the same.
The half Danish trolley or Danish container:
(These carts have exactly half the inside dimensions of the standard Danish trolley)
External dimensions half Danish trolley (Danish container): (L x W x H)
715 x 565 x 1900 mm
Inside dimensions of this half Danish trolley: (L x W x H)
635 x 545 x 1735 mm
The genuine half Danish trolley or Danish container:
(These carts have exactly half the outside dimensions of the standard Danish trolley)
Outer dimensions genuine half Danish trolley (Danish container): (L x W x H)
675 x 565 x 1900 mm
Inside dimensions of a half Danish trolley: (L x W x H)
595 x 545 x 1735 mm
The Retail trolley:
Outer dimensions EC container (Retail trolley): (L x W x H)
610 x 810 x 1900 mm
Inside dimensions EC container: (L x W x H)
530 x 790 x 1735 mm
The Auction trolley or Armani trolley:
Outer dimensions Auction cart or Armani trolley: (L x W x H)
1310 x 1020 x 1900 mm
Inside dimensions Auction cart or Armani trolley: (L x W x H)
1230 x 1000 x 1730 mm
Wheels
Horti-Innovations has various types of wheels in its range. Depending on the type of trolley and the desired application and load capacity, we can fit the trolleys with:
Type 1 Wheels
Type 2 Wheels
Type 3 Wheels
Type 4 Wheels
Type 1 Wheels
Most trolleys come with standard hard plastic wheels. Although these are sufficient for most standard applications within horticulture, they certainly have some drawbacks:
Even on a relatively clean, flat surface, the trolleys make unnecessary noise. Any unevenness also produces vibrations, which can lead to displacement and even damage to the products on the trolley. The load capacity of the standard type 1 wheels is good for standard applications, the materials used adequate.
Type 2 Wheels
If the standard type 1 wheels are not enough, our type 2 wheel comes highly recommended. Due to the ball bearings, these run very lightly. The sandwich construction with a layer of rubber between rim and tread reduces vibrations, while retaining the benefits of a hard tread. In addition, the load capacity is more than sufficient for heavy-duty applications.
Type 3 Wheels
For applications where the trolley needs to be quiet and vibration-free, the Type 3 wheel is the one to go for. These castors have been developed for flight cases. Also very suitable for (rolling) containers, aluminium boxes and, for example, for use under equipment that is constantly being loaded and unloaded from trucks. This makes them ideal for trade fair construction, among other things, also because they do not leave streaks on floors. These wheels are extremely durable, can take a beating and do not deform. The rubber tread absorbs vibrations and allows moving without noise. This also makes the Type 3 castors ideal for applications in retail and logistics.
Type 4 Wheels
For extra-heavy applications, we have the type 4 wheel: just as quiet as the type 3 wheel thanks to the rubber tread, but even easier to manoeuvre thanks to the smooth-running ball bearings and a considerable load capacity. These wheels were developed for flight cases. Also very suitable for (rolling) containers, aluminium boxes and, for example, for use under equipment that is constantly being loaded and unloaded from trucks. This makes them ideal for trade fair construction, among other things, also because they do not leave marks on floors. These wheels are extremely durable, can take a beating and do not deform. The rubber tread absorbs vibrations and allows moving without noise. This also makes type 4 castors ideal for applications in retail and logistics. Our type 4 wheel is also available with a brake.
